Contact Us   
Your Position: Home > News > Industry News

Wire rope broken wire

2016/5/30      view:

Missing or illegible sling identification.

Broken wire and a separate part of the sling, 10 randomly distributed in a Jiangsu vigorously - wire rope broken wires, or 5 in a string on a piece of broken wires.

Multi strand rigging, each lying 20 broken wire. Less than 8 parts weaving cast stone, 20 broken wire weaving. Some 8 or more knitting rigging, 40 broken wire.

Severe local wear or curettage. Kink and crush the bird atresia, or any other damage caused damage to Jiangsu full - wire rope sling structure. Evidence of heat damage.

End attachments, deformation, or wear, and the strength of the sling is greatly affected. Severely corroded rope, final attachments, or accessories.

Hooks, in addition to the standard B30.10 ASME. Manipulation of the hardware, in addition to the standard ASME B30.26 other conditions, including visible damage, arouse suspicion to use sling. Nylon mesh sling (ASME B30.9) - a synthetic Web sling should be far away from the service if the conditions are as follows

Missing or illegible sling identification. Acid or alkali burn. Any part of the melting or carbonization of the sling. Holes, tears, cuts, or obstacles. Jiangsu full damage or wear and tear in the bearing stitching stitching.

Excessive wear. In any part of the sling. Any part of the sling or discoloration and brittle intense areas, may mean that the chemical or UV / sun damage.

And accessories, corrosion, crack, bending, twisting, planing or crushing. Hooks, in addition to the standard B30.10 ASME.

Control hardware, in addition to the standard B30.26 ASME

Other conditions, including visible damage, arouse suspicion to use sling.

Polyester (ASME B30.9) - round rigging a synthetic round sling should be far away from the service if the conditions are as follows

Missing or illegible sling identification.